How to Maximize Battery Life in Your Robot Vacuum?

Is your robot vacuum's battery draining out too fast, rendering it unable to complete the cleaning task? Battery life is among the most essential aspects of maintaining your robot vacuum functioning efficiently and effectively in the long run. You must know how to keep the battery to get the best out of your investment. In this blog, we will tell you simple steps to prolong the battery life of your robot vacuum and keep it at its optimum for years.
 

Why is maximising battery life so important?

A durable battery is critical for your robot vacuum's operation. If the battery is in good condition, the vacuum runs longer, requires less recharging, and is more efficient. However, batteries wear out with time and lose their ability to hold a charge, shortening the cleaning duration and increasing recharging time. Not only does a new battery cost you, but it can also be intrusive to your cleaning routine. Maximising battery life allows you to avoid such problems, keep your vacuum working optimally, and make it last longer.
Let's move on to some fundamental steps that you can implement to get the best out of your vacuum's battery. 

Avoid Overcharging and Draining the Battery to Zero.

Overcharging or allowing the battery to drain completely can damage it and accelerate the depletion of power capacity.

How to do it:
Unplug when charged: Unplug the vacuum as soon as it reaches 100%. This prevents the battery from remaining plugged in after it's charged.

Recharge at 20-30%: Do not let the battery drop to zero before recharging. Attempt to top it off when it falls between 20-30% to avoid deep discharges that cause the battery to deteriorate more quickly.

Use an innovative charging system: Numerous newer models come with enhanced charging technology that optimises charging cycles so that the battery stays in top condition. If your model does not have this, just set an alarm to unplug it after a few hours of charging.

Pro Tip: 
If you will be keeping your vacuum for a while, charge it to about 50%. This prevents the battery from getting too low or too full in storage, which can extend its lifespan.
 

Check Components Regularly for Damage

Outdated components cause the vacuum to work more, depleting the battery quicker.

How to do it:
Inspect brushes, filters, and wheels regularly: Inspect for hair, dirt, or debris that may block the brushes or filters. Ensure wheels spin quickly.

Replace worn parts in time: If you notice the brushes are worn, change them. A dirty or plugged filter will impair airflow and lessen suction, causing the motor to draw more power and drain the battery quickly.

Pro Tip:
Regular maintenance prevents minor issues from turning into costly repairs. Regularly cleaning the filters and brushes prevents undue stress on the motor and battery. Most vacuum cleaners have self-cleaning capabilities that keep brushes and filters healthy, lessening the need for frequent hand maintenance.
 

Clean the Brushes, Filters, and sensors regularly. 

Dirt and debris cause resistance, which makes the vacuum work harder to do simple tasks and use more battery.

How to do it:
Clean brushes after each use: Hair and dirt can quickly become entangled in the brushes, causing the vacuum to work harder. Use scissors to cut out any tangled hair carefully, then use a soft-bristled brush to remove any debris from the rollers.

Clean sensors: Dust from sensors may hinder the vacuum's navigation, make it work inefficiently, and waste energy. Gently clean the sensors using a soft microfiber cloth.

Regularly empty the dustbin: An entire dustbin forces the vacuum to work harder to pick up dirt, quickly draining the battery. Empty the dustbin after every cleaning cycle.

Pro Tip: 
If pets are a part of your household, clean filters and brushes more frequently to avoid too much hair accumulation. Quick brush cleaning after every usage can enhance effectiveness. Many Vaccum cleaners come equipped with automated self-cleaning and dirt discharge functions, reducing manual cleaning time and maintaining superior performance, all while saving battery life.
 

Properly Store Your Robot Vacuum

Proper storage of your robot vacuum helps prevent battery degradation, particularly in extremely cold or hot temperatures.

How to do it:
Store in a dry, cool place: Keep the vacuum out of sunlight or heat-generating appliances such as radiators and windows. Too much heat accelerates battery degradation.
Position the charging dock correctly: Place the dock on a flat, cool surface to avoid overheating when charging.

Pro Tip:
If you're not going to use the vacuum for an extended period of time, store it in a cool, dry environment. Keep the battery charged to 50%, and it will stay healthy when you're not using it.
 

Optimise Cleaning Paths and Frequency: Minimize Unnecessary Energy Waste

Optimising cleaning paths and minimising unnecessary cleaning can save battery life by making the vacuum work smarter, not harder.

Update Cleaning Map: To prevent repetitive cleaning of the same spots, update the map frequently, enhancing battery efficiency.

How to do it:

Update the map when you move furniture: If you move furniture or rearrange your home's layout, ensure the vacuum gets dated. This will prevent it from peat cleaning areas.

Enable "no-go zones": Use the app to demarcate the area for the vacuum. If there's a room that you do not wish the vacuum to clean, use it as a no-go zone.

Set No-Go Zones and Virtual Walls: Don't waste battery cleaning unnecessary spots.

How to do it:

Set virtual walls: Most robot vacuum cleaners allow you to create virtual walls to keep the vacuum away from particular rooms or places with too many obstructions.

Designate zones for heavy traffic: Spaces such as the living room or kitchen require more frequent vacuuming. Label these priority areas to get the vacuum and spend extra time there.

Pro Tip:
Some high-end models can automatically adjust their cleaning path according to the layyour home's layout,ng needs, and the amodirt content intelligent systems save energy and maximise battery life.
 

Use Eco Mode Where Available

Eco mode is a battery saver that minimises suction power, ideal for lighter cleaning.

How to do it:

Turn on eco-mode for light cleaning: Use eco mode for cleaning spaces with minimal dirt and debris. It conserves energy by decreasing suction power, allowing the vacuum to last longer.

Use higher suction power only during deep cleaning: To attain a better clean in high-traffic regions or areas with additional dust and filth, use a higher suction mode.

Pro Tip:
If your robot vacuum operates with varying power levels, use eco mode for standard cleaning maintenance and save heavier suction for heavier-duty cleaning chores, like carpet cleaning. Various vacuum cleaners on the market have an eco-mode feature that saves battery power without sacrificing cleaning effectiveness for daily maintenance cleaning.
 

Prevent Liquid Exposure

Water or moisture can ruin the internal parts of the vacuum, particularly the battery.

How to do it:
Dry the vacuum: Never operate the vacuum in places where there is a risk of water spillage, such as near open water bottles or pet bowls.
Turn it off immediately if wet: If liquid enters the vacuum, turn it off immediately, dry it, and check for damage before using it again.

Pro Tip:
If your robot includes a mop function, ensure the mop heads are cleaned and dried before using them again to avoid water accumulation within the machine.
 

Identify When the Battery Must be Replaced

All batteries deteriorate with time. Knowing when to replace the battery will ensure your vacuum is maintained at peak performance.

How to do it:
Monitor battery degradation: Your robot vacuum could be draining its battery much quicker than usual or taking more time to charge, which could lead to a new battery.

Check the user manual: Some vacuums have an indicator that shows battery health. When it's time for a new battery, be sure to choose one that is compatible with your vacuum.

Pro Tip:
If your vacuum’s battery is replaceable, always opt for an original battery to ensure compatibility and optimal performance.

Final Words

Optimising your robot vacuum's battery life is the key to making it function optimally for years. By embracing easy habits such as not overcharging, cleaning parts frequently, and utilizing eco mode, you can extend the battery's life and make it function better.

If you keep your vacuum in good condition, it will clean your house efficiently while requiring fewer recharges. Elbotics Electronics is the best option for an intelligent for vacuum battery with a long battery life,

Begin applying these tips today to have a cleaner, more efficient home. To maximise your investment, extend the life of extend the vacuum.